Renault – Front Exit Exhaust Details

Copyright Sutton Images via Formula1.com

Although we almost didn’t believe it when the rumours emerged at the launch of the Renault R31, The car does indeed have exhausts that exit at the front of the sidepods. We (@f1fanatic.co.uk and I) managed to see, understand and get the first pictures of the unique set up (http://scarbsf1.wordpress.com/2011/02/01/renault-r31-front-exit-exhausts-fee-explained/). Now the car can be seen stripped in the pit garage, we can see exactly how the Renault packages the exhaust.

The exhaust system routes the four pipes into a collector which then continues to point forwards and direct the secondary pipe low underneath the radiator to the front of the sidepods. As the exhaust routes gasses at up to 1000-degrees C, it needs insulating to protect the other equipment housed in the sidepods. Renault appear to have fitted an insulated jacket around the main length of pipe in the sidepods. What is clear from the set up is that Renault had to raise the radiators to allow the pipe to ass underneath. The R31 has unusually large sidepod inlets and this might to cope with the ducting of the cooling airflow to the laid down radiator.

Copyright: Andrew Robertson (@JarZ)

From these pictures via Andrew Robertson (@Jarz) we can see the front detail around the sidepods. Although the exhaust outlets are not seen here, the problem of the final routing is apparent. Teams need to fit beams to the side of the monocoque for side impact protection. Known as Side Impact Tubes (SITs) there are two pairs to share the load, with one upper pair and a lower pair. As these SITs are heavy, the majority of the work is down by the lower pair, to keep the weight low in the car. Correspondingly the lower SITs are larger and the exhaust needs to pass over these and down to exit sideways.

Copyright: Andrew Robertson (@JarZ)

Renault has packaged these lower SITs into a narrow front and wider rear Tube. The exhaust will angle down along the front tube to blow still pointing downwards across the lower leading edge of the floor. We can see the metallic heat protection on the SITs.

Copyright: Andrew Robertson (@JarZ)

More info on Front Exit Exhausts and how they work – http://scarbsf1.wordpress.com/2011/03/22/trends-2011-exhausts-and-diffusers/

Follow ScarbsF1 on Twitter

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>